Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSensor Calibration in Weatherford, TX
Sensor calibration in Weatherford typically costs between $95 and $160, depending on whether the issue is a simple alignment adjustment or requires a replacement of the photo-eye brackets and wiring. If your garage door reverses unexpectedly or refuses to close unless you hold the wall button, the safety sensors are likely out of alignment or failing, and we can usually resolve this in a single visit.
At Servo Garage Doors Weatherford, we don’t guess what your door needs. We operate under The Haven Standard, which means we photograph the failed component before we ever quote a repair. If your sensors are simply misaligned due to the vibrations common in older homes near the Brazos River or from heavy wind gusts common in Parker County, we will show you the exact misalignment issue on our documentation before we start work. We provide Garage Door Repair in Weatherford with a commitment to transparency that starts with a flat, written price before any technician picks up a tool. Call us at (940) 353-1271 to get an accurate, upfront quote for your sensor repair.
When You Need Sensor Calibration
Safety sensors-the small, black boxes mounted near the floor on either side of your garage door track-are designed to stop the door if an object breaks the infrared beam. When these systems fail, it is more than just a convenience; it is a security risk. You generally need professional calibration or repair in the following scenarios:
- The garage door reverses immediately: If the door starts to close but stops and reverses back up while the opener lights flash, the sensors are likely not “seeing” each other. This is often caused by a bump to the bracket or a shifting floor foundation.
- The door only closes when holding the wall button: This indicates the opener has defaulted to a “manual override” mode because it cannot confirm the safety beam is clear, which is a significant safety hazard for households with children or pets.
- Intermittent operation during Weatherford humidity: Moisture can corrode the delicate wiring connections inside older sensor units, causing the beam to flicker or cut out entirely during the damp Texas spring.
- Physical damage to the bracket: If a vehicle or heavy object has knocked the sensor bracket out of alignment, the beam will be misdirected, preventing the door from closing properly even if the wiring is intact.
- Sunlight interference: In some cases, especially with older LiftMaster or Craftsman models, direct sunlight hitting the receiving eye can overwhelm the sensor, requiring a recalibration or a sun-shield installation.
If you are experiencing these issues, do not attempt to bypass the safety sensors. These are critical safety devices required by UL 325 standards. Call (940) 353-1271, and we will come out to assess the system, provide a written scope of work, and fix the alignment or replace the faulty hardware.
Our Sensor Calibration Process
We do not use “guesswork” to fix garage door issues. Our process is built on documentation. When you call Servo Garage Doors Weatherford, you are getting a technician who follows a strict, evidence-based workflow to ensure the job is done right the first time.
- Visual Inspection and Testing: Our technician arrives and immediately tests the beam continuity. We check the alignment of the sending and receiving eyes to see if they are physically obstructed or loose.
- The Haven Standard Documentation: Per Clause 4 of The Haven Standard, we photograph the current state of your sensors and brackets. If we find a broken wire or a faulty logic board, we take a photo of it so you can see exactly what the problem is before we suggest a repair.
- Written Scope and Price: Before we turn a wrench, we provide a flat, written price and a written scope of work. You will know exactly what the sensor calibration or replacement will cost, with no hidden fees or surprise upcharges later.
- Precision Alignment or Replacement: We use laser-level tools to align the brackets. If the sensors are beyond repair, we replace them with high-quality, compatible units for brands like Raynor, Chamberlain, or Wayne Dalton.
- Final Safety Verification: Once the sensors are aligned or replaced, we perform a multi-point safety test, including the entrapment reversal test, to ensure the door stops and reverses when the beam is broken.
- The Digital Record: When the job is finished, you receive a documented photo record of the findings and the completed work, ensuring you have a paper trail of the repair for your home records.
This process is how we’ve made more than 18,000 garage doors right since 2015. We believe that if you can’t document the repair, it didn’t happen. If you have an estimate from another company, bring the paperwork to us-we offer a Free Second Opinion on any written estimate to ensure you aren’t paying for repairs you don’t actually need.
BeforeAfterSensor Calibration Pricing in Weatherford
We operate on a flat-fee basis for sensor work. Because we don’t believe in “call for a quote” games, we provide transparent pricing ranges based on the specific type of service required. The following table outlines our typical pricing for sensor-related work in the Weatherford area.
| Service Type | Price Range |
|---|---|
| Sensor Alignment & Logic Board Reset | $95 – $130 |
| Sensor Bracket Repair/Re-mounting | $110 – $150 |
| Full Photo-Eye Sensor Replacement | $140 – $190 |
| Wiring Repair/Short Circuit Fix | $120 – $175 |
These prices include our travel to your home in Weatherford, the diagnostic time, the labor, and the parts. We always provide a firm, written price before we start any work, ensuring you are never surprised by the final bill. If your sensors are malfunctioning, call (940) 353-1271 today for a free estimate and to schedule a technician who will show up in a marked vehicle, ready to document and repair your system.
FAQs - Sensor Calibration
How do I know if my garage door sensors are bad or just dirty?
Most of the time, sensors just need a simple cleaning with a dry, microfiber cloth to remove dust or spiderwebs, but if the LED light on the sensor is completely off or flickering despite being clean, it is likely a hardware failure. If you have wiped the lenses and the door still refuses to close, call (940) 353-1271 so we can inspect the wiring and logic board for you.
Can I bypass the garage door sensors to get the door closed?
No, you should never bypass the safety sensors because they are a crucial safety feature that prevents the heavy door from crushing objects or people. If your door will not close, it is a sign that the safety system has identified a fault, and you should have a professional diagnose the issue to ensure your home remains secure.
Does a power outage in Weatherford affect sensor calibration?
A power outage usually does not affect the physical alignment of your sensors, but it can sometimes cause a logic board to lose its “travel limits” or safety settings. If your door acts erratically after a storm or power flicker, we can perform a recalibration of your opener’s settings to restore normal operation.
How long does sensor replacement take?
A standard sensor replacement typically takes between 45 and 90 minutes from the time we arrive until we finish the final safety test. We carry common sensor parts for major brands like LiftMaster, Chamberlain, and Raynor, allowing us to complete most repairs in a single visit without needing to order parts.
Written by Marcus Deller, Owner at Servo Garage Doors Weatherford, serving Weatherford.