Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Fort Worth
Garage door installation in Fort Worth typically runs $700-$2,200 for a new single or double door, and most standard installs are completed in one day. But Fort Worth isn’t a standard market. The Blackland Prairie clay under most of Tarrant County moves constantly, and that movement racks door frames out of square, breaks weather seals, and shortens the life of any door installed without accounting for it. We quote a flat, written price before we touch anything, and we photograph what we find so you see it too. Call (940) 353-1271 for a free estimate on a new door, a custom door, or a conversion that actually fits your opening.
Why Servo Garage Doors Weatherford Is Fort Worth’s Preferred Garage Door Installation Company
Fort Worth homeowners ask for two things on an install: show me the price in writing before you start, and don’t make me take a second day off work. That matches how we’ve worked since 2015. Every job follows Garage Door Installation protocol under The Haven Standard: a flat, written scope delivered before any work begins, a photographed record of what we found, and a photographed record of what we did when we left. No estimate that turns into something else at the end of the job.
We’re independently owned and operated, not a franchise. Marcus Deller runs the crew, and the technician who shows up at your Fort Worth home is background-checked, uniformed, and carrying the parts most installs need on the truck. That matters in a city this spread out. Fort Worth covers 350 square miles, from the Alliance corridor up north to the older mid-city grid around Wedgwood and Ridglea Hills. A crew that has to drive back across town for a track bracket wastes your afternoon. We plan for one trip.
Fort Worth customers also push back on vague pricing harder than most. They should. Clause 1 of The Haven Standard says the written price comes before the work, not after. If you bring us a competing written estimate, we’ll give you a free second opinion on it. You see what you’re paying for before we unbolt anything.
Our Garage Door Installation Services in Fort Worth
New Door Installation
A new door in Fort Worth starts with measuring what’s actually there. Not what the builder’s blueprint said in 1982, but what the clay has done to the opening since then. In neighborhoods like Westcliff and Wedgwood, we regularly find openings that have drifted a quarter-inch or more out of square. We correct the track alignment during the install so your new door doesn’t bind in August or drag after the first big rain. New door installations in Fort Worth run $700-$2,200 depending on size, material, and insulation level. You’ll see that number in writing before we start.
Single Car Door
Single-car openings are common across Fort Worth’s 1970s-1990s brick ranches, and a lot of them still run original extension-spring systems. That’s fine until the spring lets go and leaves the door jammed half-open, which is exactly what we found on a ranch in Wedgwood a while back. We converted the extension springs to a high-cycle torsion system, rehung the door on fresh tracks, and replaced the flattened bottom seal with a vinyl bulb rated for Fort Worth heat. One trip. The homeowner was back in their workshop that afternoon.
Double Car Door
Double-car doors on detached workshops and larger acreage properties around Fort Worth need more than a bigger panel. They need openers and springs matched to the actual weight of the door. If the spring isn’t wound for the door’s real weight, the opener strains, burns out, and fails early. We size the torsion spring to the door, not to a generic chart. For a heavy 16-foot door on a workshop, that often means upgrading to a high-cycle spring and an opener rated for the load. The difference is a door that runs smooth for years instead of a motor that dies in two.
Custom Garage Door
Fort Worth’s Fairmount Historic District has some of the narrowest garage openings in the metro. Many of those early-20th-century detached garages are 8 feet wide, brick-faced, and accessible only by alley. A stock door won’t fit, and a suburban installer who only hangs standard 9-foot panels will tell you it can’t be done. We do custom sizing, non-stock track geometry, and door builds that match the opening as it actually measures. If you’ve been told your historic garage can’t take a functioning door, that’s usually a measuring problem, not a garage problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Worth
We install and service LiftMaster, Chamberlain, Craftsman, Raynor, and the rest of the major brands, and we stock the parts Fort Worth installs actually need: high-cycle torsion springs, heavy-duty openers, R-value rated vinyl bottom seals, and track brackets sized for out-of-square openings. If you already have a brand preference, we’ll work with it. If you want a straight answer on which door holds up to Fort Worth hail and 100-degree summers, we’ll give you one. No upcharge disguised as a recommendation.
Common Garage Door Installation Problems We See in Fort Worth Homes
- Racked frames from expansive clay. Blackland Prairie soil swells and shrinks with moisture, and over a few decades it pushes garage slabs and door frames out of square. A new door installed on an out-of-square frame binds, drags, and wears rollers in months. We realign the track during installation, not after the door starts sticking.
- Hail-damaged single-layer steel panels. Fort Worth sits in one of the highest-frequency hail corridors in the country. Older single-layer steel panels dent and perforate in spring storms, which breaks the weather seal and throws the door out of balance. Panel replacement runs $250-$500 and restores the seal before heat and bugs get in.
- Undersized openers on workshop doors. A heavy double-car door on a detached workshop with an opener rated for a lightweight single door will strain every cycle. The opener burns out, and sometimes takes the logic board with it. Opener installation in Fort Worth runs $250-$550, and we match the unit to the door weight, not the price point.
- Dead seals and worn rollers from extreme heat. Fort Worth summers accelerate rubber seal degradation faster than manufacturer ratings assume. Weeks above 100°F flatten bottom seals and crack PVC astragals, which lets dust, heat, and water into the garage. A seal replacement is a small job that saves you bigger problems in February.
Pricing for Garage Door Installation in Fort Worth, TX
Here’s what Fort Worth installs actually cost, in dollars, not ranges you have to call to hear:
| Service | Fort Worth Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Track Realignment | $120-$240 |
| Spring Repair | $180-$340 |
| Opener Installation | $250-$550 |
What changes the number: door size and width, insulation level, whether you need a custom track, and whether the opening needs correction before the door goes in. Clay-damaged frames add realignment time. Heavier workshop doors need heavier springs. You’ll get a flat, written scope and price before any work starts, and the number we quote is the number you pay. Call (940) 353-1271 for a free estimate. Estimates are free, written, and delivered before you commit to anything.
We Also Serve Cities Near Fort Worth
Our crews cover Fort Worth and the surrounding Tarrant County communities every week. That includes Haltom City, Crowley, Burleson, and Azle, along with the full Fort Worth metro area. If you’re on the edge of the city or a few miles out on an acreage lot, we still show up with the parts on the truck. Dispatch is coordinated from our Dallas-Fort Worth office, and crews run local routes to Fort Worth daily.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Fort Worth
Yes, if the door is a double-car or oversized panel, you need an opener rated for the actual door weight. Most workshops have doors heavier than stock residential panels, and an undersized opener strains the motor, strips the gear, and fails early. We match the opener to the measured door weight, and opener installation in Fort Worth runs $250-$550. Call (940) 353-1271 and we’ll tell you if your current opener is underrated, usually before we even touch it.
You can replace just the bottom seal in most cases. Fort Worth heat destroys rubber seals faster than the rest of the country, and a flattened or cracked seal is the most common fix we make on doors that are otherwise fine. We replace the seal with an R-value rated vinyl bulb built for the temperature swings here. That’s a small job, usually under an hour, and it doesn’t require a new door. Call (940) 353-1271 and we’ll quote it in writing.
For a workshop in Fort Worth, we recommend at minimum an R-9 to R-12 polyurethane-insulated door. Single-layer steel panels radiate summer heat into the shop, and in February they do nothing to hold heat in. A polyurethane core does both, and it survives hail better than a single-layer panel. We’ll quote options in writing so you can compare the price difference, not guess at it.
Expansive clay under Fort Worth slabs moves with moisture, and that movement racks door frames out of square over time. Install a new door on an out-of-square frame and it binds, drags, and chews through rollers within a year. During installation we check the frame with a level and correct the track alignment before hanging the door. If the frame is too far out, we’ll tell you that and quote the realignment as part of the same job. Track realignment runs $120-$240 in Fort Worth.
Yes. Those narrow Fairmount alleys and detached garages with 8-foot openings are exactly why we do custom sizing. A stock 9-foot door won’t fit, and cutting corners on the track just makes the door jam. We measure the opening, build the door to the actual width, and set the track geometry to match. It takes a little longer than a stock install, and you’ll see the price in writing before we start. Call (940) 353-1271 and ask about custom-width doors for historic Fairmount garages.
Call (940) 353-1271 for a free, written estimate on garage door installation in Fort Worth. Marcus Deller and the crew at Servo Garage Doors Weatherford will give you the flat price before any work starts, and the photo record when the job is done.
Written by Marcus Deller, Owner at Servo Garage Doors Weatherford, serving Fort Worth and Tarrant County.